Right beads, wrong place

Tags

, , ,

I made a necklace. I like the beads, and I like the necklace but sadly I have a horrible suspicion that I’m going to dismantle it.

Pink beads

asymmetric pink necklace

It’s an asymmetric necklace with a mix of different shaped beads in different sizes. It works well on the beading board, the problem is when it’s on a body…

Pink necklace

… the square shaped beads lie horizontally instead of face on. See that pesky bead at the bottom? What do you think, is this a feature or a fail?

I like the big square beads, but I now realise the hole needs to be offset if they are to hang correctly at the bottom of a necklace. I should have remembered this from my big lentil necklace. The weight of the necklace is all wrong if I rotate it so that the square beads are on the side instead.

pink bead bracelet

It works quite well as a multi-strand bracelet provided that you don’t move your hand at all. I’m trying to decide if I should take the necklace apart and use the beads to make four stacking bracelets instead.

Virtually Amsterdam

Tags

, , , ,

I decided to make time to take part in the Virtual Paintout again. This is a fun project by Bill Guffey where he chooses a destination and then we use google maps to find views to paint. This month it’s Amsterdam.

Amsterdam

“It’s Amsterdam, only bonkers” by Cate van Alphen

It was quite near the end of the month when I started, so I decided to focus on something fun rather than strictly accurate. I’ve done some messy gesso in the background on a piece of blue paper. I used paint pens and only slightly exaggerated the tilt of the buildings.

I wanted something a little bonkers to reflect the feeling of Amsterdam which is full of fun surprises. For example a museum of Fluorescent Art or tiny houses in a crack between two buildings.

Tiny houses

Evolution of a wishpot

Tags

, , , ,

I’ve just finished a commission for a wishpot which has helped me work out some of the technical issues I’ve had with stringing them. I began making these several years ago so I’ll show you some highlights in their evolution. Apologies for the quality on the older photos, I’ve tried to fix the colour balance.

Pearl wishpot necklace

This mother of pearl effect wishpot was one of the first I made. It is strung directly on the necklace. The bead stopper can be lifted to open the wishpot. The necklace string keeps it in place when it’s being worn.

Pearl wishpot open

There were a few things I didn’t like about this design. Firstly the necklace needs to be thin in order for the bead lid to be opened (the stopper bead plus cord on either side needs to fit through the mouth of the pot). Also unless it is a specific commission I get stressed about choosing the length for a necklace.

purple wishpot

For my next version, I wanted the pendant to go on a thicker kumihimo cord. Since there was no hope of this going through the opening of the wishpot, I put it on a ribbon that created a bail to hang on the necklace. I included lengths of ribbon in the necklace to link the design together. This version was better, but still not massively versatile – I couldn’t picture the ribbon working on something like a chain.

wishpot mala

My latest necklace was for a wishpot on a mala necklace. I used beads made from imfibinga seeds. The necklace needed a specific number of beads which made it pretty long. I wanted a way to allow the necklace to be shortened without adding a clasp. My solution was to add a button toggle to the wishpot attachment.

wishpot mala necklace

This means the necklace can be doubled over and the wishpot used to attach the two sides together. The wishpot can now also exist independently, so for example you could pop it in your pocket or wear it on a belt loop.

wishpot

The thin nylon cords still allow the pot to be opened. and the bead and macrame knotted button hole on either side keep the pieces together. Hooray! It finally feels like all the pieces of this design make sense!

mala wishpot open

Groovy blast from the past

Tags

, , , , ,

My blog has been a bit quiet while I sort out a backlog of chores at home and excavate my workspace. Part of this process has been getting my jewellery listed online (it’s not entirely logical but I feel like I can’t make new stuff if there is nowhere for my existing things to go). The good news is that I have finally gotten some of my vintage teacup inspired earrings listed in my shop. I made them a few years ago, so here’s a reminder.

selection of floral earrings

I have also finally completed a little tutorial video. It’s just a small tip for sanding your polymer clay when there is wire embedded in it (like for the triangle shaped pieces pictured above in the last row). It’s currently available as a preview for my Patreon subscribers, but I’ll be making it public soon.

I finished a… thing

Tags

, , , , ,

A few years ago I made a Bead Habitat. You may have noticed that all the pictures are fairly tightly cropped. This is because I hadn’t finished the edges.

bead habitat

I had intended to frame it as a picture to go on the wall, but my mother objected, saying that it was too tactile for that and needed to be explored closely rather than hung from a wall. After that it got buried under all the debris on my beading table.

bead habitat detail

As part of my recent tidying, I came across it again, and decided to finish it. I’ve done a bead edging and a backing fabric to hide my workings. I had to try really hard not to embellish the back too!

bead habitat

I’m not entirely sure what it is. It’s a kind of sculptural, 3D painting, abstract, mini landscape, ornament… thing. It’s purely decorative and quite small, so I’m thinking of it as “coffee table jewellery”.

Bead habitat detail

It’s a mixed media piece including some of my polymer clay beads and components, silk covered wire, embroidery and glass beads on fabric.

bead habitat

bead habitat detail

Let me know what you think it is. Sometimes feel that I don’t make these things, I’m just there when it happens. 🙂

Proddy Rug

Tags

, , , ,

It’s been a while since my last blog, so here’s a look at my current project. It’s a proddy rag rug. Inspired by hours looking at the rugs in Craftworkshop, I decided to give this a try since I have a lot of scrap fabric.

Rug in progress

Rag rug in progress

Of course I didn’t actually look at any tutorials, I just looked at the rugs in the shop and guessed how they were done. I’m using scraps of fleece fabric and a knitting needle for the prodding. I’m not using a frame, but perhaps I should be, since it’s curling a bit on the back. I suspect my scraps are a bit densely packed too, but I think it will be ok since there is a recess at my front door which I am making this to fit into. I’ll just jam it in and stomp it flat when I’m done.

wrong side of rug

Back of rug

I’m doing an abstract design, just planning it as I go. It’s like a very slow motion doodle and is strangely addictive. Often I find it helps keep me interested if I don’t plan things out too fully. It’s also satisfying finding a way to recycle my scraps of fabric.

If you’d like to see a pro making one, here’s a nice video:

And this pdf tutorial even gives instructions for making the tools you will need.

Update: Here’s a more recent photograph with further progress on my rug.

Rug WIP